activTek AP3000 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oczyszczacz powietrza activTek AP3000. activTek AP3000 12 stron. Portable whole home office system
Również dla activTek AP3000: Podręcznik (16 strony), Podręcznik użytkownika (12 strony)
Drukuj stronę
INSTALLING THE ACTIVEPURE (RCI) CELL & PURIFIER PLATE
When installing the
To Install:
purification plate,
Rear Lint Screen
follow steps 5 - 9
be sure the metal
tabs are making
Purifier Plate
follow steps 4 - 9
contact with the
ActivePure (RCI) cell
screen on each side
follow steps 1 - 9
of the plate .
2
2. Replace
the two (2)
thumbscrews
and tighten.
INSTALLING THE REAR LINT SCREEN
5
5. Replace
Note: The bottom
of the rear lint
screen is held
into place by two
alignment guides
(see inset).
WARNING: Do not operate
AP3000 by activTek without the
rear lint screen and back cover
properly installed.
the rear
lint screen,
inserting
the bottom
of the lint
screen first.
3
3. Insert the
ActivePure
(RCI) cell
connector
into the plug
on the plate
cage. Press
the connector
firmly until the
two tabs lock
into place.
6
6. Secure the
top of the
lint screen by
replacing the
two (2) lint
screen holder
thumbscrews.
8
8. Replace
the back
cover
screw.
A P 3 0 0 0
1
1. Slide the ActivePure
(RCI) cell up and into
the unit. Be sure
the back lip of the
ActivePure (RCI) cell
engages the two
slotted protrusions at
the rear of the plate
cage, and that the
angle brackets and
studs are correctly
aligned.
4
4. Gently
insert the
purifier
plate
between
the guides
(inside the
cage) until
it stops.
7
7. Replace
the back
cover by
snapping
into place.
9
9. Reinstall the
power cord.
For disassembly instructions,
see page 8 .
9