activTek EAGLE 5000 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oczyszczacz powietrza activTek EAGLE 5000. activTek EAGLE 5000 16 stron. Electronic air purification system 100, 120, 220, and 240 volt systems

Drukuj stronę

TROUBLESHOOTING

Indicators of Operation

Operation of the ion indicator lamp:

Turn the unit on and check that the small red/orange lamp is illuminated . The lamp is

located inside the unit and is viewed by looking into the unit through the front grill .

Illumination of the internal lamp verifies that the frequency type ionizer is functioning

properly . The lamp should stay illuminated as long as the unit is turned on .

Troubleshooting - What to look for first.

1. I have plugged in the unit, turned "ON"

the power switch and nothing happens...

what's wrong?

• Make sure the electrical outlet is capable

of providing power to the unit .

• Check the lint screen located at the back

of the machine to ensure that the safety

switch activator clip depresses the safety

switch .

• Check to see if the proper fuse is installed

and that it is serviceable .

• Ensure that the fuse cap is completely

seated and secured in its receptacle .

• Be sure the cord is fully plugged into unit .

2. The fan is operating although the unit

won't produce any ozone... what's

wrong?

• Check the purification plate(s) for

serviceability . If they are cracked

or broken, the plate(s) will require

replacement . Ensure maintenance

procedures required for the purification

plate(s) have been performed according

to the "Maintenance" section (page 11)

of this owner's manual . Order new plates

from your Ativtek Dealer .

• Electrical stainless steel contacts are not

contacting the screen portion of the

purification plate(s) . Inspect the unit for

any loose connections .

• Do not attempt to disassemble the unit,

due to the Limited Warranty of the

product .

3. How am I able to know if the Frequency-

Type Ionizer is working?

• Current models with the FT Ionizer system

have a neon light bulb mounted on the

base of the FT antenna . When the power

switch to the unit is turned ON, the neon

light bulb will illuminate, indicating that

the FT Ionizer is functioning normally

(see above, "Indicators of Operation") .