Autonics LSE-4A5R2 Podręcznik - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik dla Czujniki bezpieczeństwa Autonics LSE-4A5R2. Autonics LSE-4A5R2 12 stron. 2d laser scanners
Również dla Autonics LSE-4A5R2: Instrukcja obsługi produktu (5 strony)
Drukuj stronęLSE-4A5R2
▣ Installation
① Fix the bracket at the installation position using four allen
wrench bolts (M4, min. 5mm).
Allen wrench bolt
③ Align the mark line of the body and one of the three mark lines of the bracket and turn the bracket clockwise to fix.
Turn only within the adjustment range.
④ After setting the bracket rotation angle, fix the bracket and laser
scanner with the screwdriver.
M2.6×L6 tapping bolt
(for fixing the bracket rotation angle)
Installing onto an external object
When installing the bracket onto the external object, it has possibility of applying excessive force on the cable due to the lack of
space between the cable and the object.
If necessary, cut the A part and place the cable to be stable.
※ When cutting the A part, be cautious of personal injury.
D-8
② Pass the power, I/O and Ethernet cable through the holes in the
bracket.
3mm allen wrench
Body mark line
Bracket mark line
⑤ The bracket tilt angle (-3 to 3 ) can be adjusted according to the
situation of the installed location.
Following image shows the example of rotating the allen
wrench to the A direction.
Screwdriver
Mark
line 1
Mark
line 2
A
Mark
line 3