High End Systems Universal Controller Dodatek do instrukcji obsługi - Strona 9

Przeglądaj online lub pobierz pdf Dodatek do instrukcji obsługi dla Kontroler High End Systems Universal Controller. High End Systems Universal Controller 12 stron.

Drukuj stronę

Master/Slave Modes

This section of the addendum elaborates on the section in the manual titled "Master/Slave

Configuration" beginning on page 3-3.

Master/Slave Modes and Preset Programming

Recall from the section titled "Preset Mode Programming" on page 4-45 of the manual that a preset

consists of the master dim level along with the master delay/audio value and any modulation effects

(color, gobo, dim or size). Because master and slave controllers are each programmed separately, it

is possible for the master controller to have a different master dim level than any of the slave

controllers.

When the preset is fired, the slave's dim level will be recalled and used by the slave. The master

controller does not store the dim level of any of its slaved controllers. However, when the master

dim level is changed on the master controller, that dim level is sent to all slaved controllers as the

new dim level. For example, if the slave's preset master dim level is lower than the master dim

level of the master controller, the light level of the slave will rise to that of the master controller.

If the same master dim levels are stored in the presets, dimming will be consistent between a master

and any slaves.

Master/Slave/Neither Modes and MIDI Commands

This section explains how selecting master, slave or neither for the controller affects the way the

controller passes MIDI commands.

Configuring the controller as a master is useful for controlling other Universal controllers, and for

outputting data to some sort of MIDI data capture system for later playback and control of the

Universal controller.

When configured as a master, the controller will Out all MIDI data.

When the controller is configured as a slave or as neither a master or a slave, it will Thru all MIDI

data. The Universal controller does not Merge data.

(Remember to take the controller out of the "master" mode when you want to control it from a

playback system.)

Addendum UN-1

Page 7