Galaxy Press GS-205B Plus Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Galaxy Press GS-205B Plus. Galaxy Press GS-205B Plus 13 stron.

Operation Instructions

1.1 Connect the power cord into a

properly grounded electrical outlet

with a sufficient amperage rating.

1.3 EXTENSION CORDS If used, should

be as short as possible and not less

than 12 gauge.Heavy duty cords are

recommended.

NOTE: If the supply cord is damaged, it

must be replaced by the

manufacturer, its service agent or

a similarly qualified person in

order to avoid hazard.

2.Turn On the System

2.1 Switch The System On(figure2.1)

1.2 VOLTAGE

120 Volt – The GS-205B requires a full 10

amp grounded circuit for 120 volt

operation.

240 Volt –The GS-205B requires a full 7

amp grounded circuit for 240 volt

operation.

1.4 CIRCUITS that have less than 10 amps or

that have other high demand equipment

or appliances(especially more than one

heat seal machine) plugged in, should not

be used.

CAUTION :

Failure to follow these instructions will cause:

1) Erratic controller functions.

2) Inaccurate displays and slow heat-up.

3) The circuit breaker to disengage.

2.1