Autonomous Anti-collision Smartdesk Instrukcja montażu - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Autonomous Anti-collision Smartdesk. Autonomous Anti-collision Smartdesk 12 stron.
Drukuj stronęModified High and Low Limitation Positions
This function can be used to limit the movement area of desktop, when the drawer is
underneath or any shelf is above the desktop. Once it is set, the new High or Low
limitation position will be stored.
NOTE: This function is not recommended for ordinary operation. Use only as needed.
Press "up" key till the display flashes as "HLP".
HLP
H-P
Keep pressing "up" or "down" key till the required high limit position is
reached.
Press "M" key, the desktop height will be displayed and the high
limit position will be set.
Repeat step 1 and step 2 , then press "2" key, the display will show "L-P" and
L-P
current height alternately, keep pressing "down" key till the low limit position is
reached, press "M" key, the low limit position is set.
Changing the Displayed Desktop Height Unit (cm/inch)
Keep pressing "M" key till the display shows "S - -".
Repeat step 1 and step 2. And then press "2" key, the display shows "Unt" and
the current height alternately, and the unit of height is "inch", press "M" key to
save the unit as "inch".