Autopage XT-43 LCD Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zdalny rozrusznik Autopage XT-43 LCD. Autopage XT-43 LCD 18 stron. Professional 2-way am/am remote car starter & keyless entry system with two-way serial port data link

Drukuj stronę

CHANGING THE BATTERY IN YOUR TRANSMITTERS

XT-33:

This transmitter uses two (2) 3-volt lithium ion batteries (#CR2016)

that are sandwiched together with the (+) side facing upward. To replace

the battery, you will need to use a small flat blade screwdriver. Locate the

small notch on the lower right side of the transmitter case next to the key

ring. Using the flat blade screwdriver, carefully pry the top case from the

bottom case.

removing the batteries note the direction of the positive (+) terminal.

Place the new batteries in exactly the same manner, being careful not to

bend or damage the contact terminal. Snap the cases back together and

then test the transmitter to insure it arms and disarms the alarm.

XT-43 LCD 2-Way

Transceiver

(1) AAA Battery

ACTIVE LOCK:

1. Press

button on the transmitter.

2. The Siren will chirp once and parking lights will flash once indicating that

the system is now active. The vehicle doors will lock upon activating

only when interfaced with the keyless entry system.

It should snap apart after breaking the seal.

XT-33

Standard Remote

Before

(2) CR2016

3-Volt Batteries