Dynaset HHK 200-17 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Szlifierka Dynaset HHK 200-17. Dynaset HHK 200-17 9 stron. Hydraulic bench grinder

2008
3
Replace and fix the protective cover. Adjust the position of a spark screen.
4
Adjust and tighten the grinding support.

OPERATION

1
Ensure that the grinder is properly connected to the hydraulic
system of your carrier machine and there are no oil leakages
in system.
2
Ensure that the unit is securely fixed onto steady base or
frame.
3
Start the engine of your carrier machine. Adjust the rpm to
the demanded level if necessary.
4
Start the grinder with a control valve.
5
Put the tool to be sharpened onto the grinding support and
re-sharpen it or make other machining.
HYDRAULIC REQUIREMENTS
OIL FLOW
MODEL
l/min
min
HHK 200/3000-12 12
HHK 200/3000-17
17
* with the grinding wheel of 32 mm
OIL PRESSURE OD
bar
max
min
max
20
180
210
30
180
210
185
301
PRIOR TO STARTING THE GRINDER
5
Grinder's protective cover has a junction pipe (OD 51)
for an exhaust blower. If an exhauster is available,
grinder can be connected to the ventilation system in
order to keep the working area clean from grinding
dust.
GRINDING WHEEL
width
mounting
hole
mm
mm
mm
200
32
32
200
32
32
HYDRAULIC BENCH GRINDER
HYDRAULIC PORTS
PRESSURE RETURN
P
T
BSP 1/2"
BSP 1/2"
BSP 1/2"
BSP 1/2"
233
4 kpl.
180
200
5/9
WEIGHT
kg
12,4 *
12,4 *
11