Autopage RF-425LCD Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Alarm samochodowy Autopage RF-425LCD. Autopage RF-425LCD 14 stron. Professional vehicle security system

Drukuj stronę

PROGRAM MODE FOR LCD REMOTE CONTROL TRANSCEIVER:

Transceiv er Button

System Function

Switching code for 2nd / 1st Car Operation

Program Mode -

Melody / Vibration Mode

Program Mode -

Power Save Mode

Program Mode -

LCD screen lamp turns on for 5 seconds.

System's Status Check

Clear the Flash Icon and Melody Sound

1. Second Vehicle Security Operation: Your remote transmitter can be utilized to control a

second vehicle Autopage security system. To program the remote control transmitter to a

second vehicle, follow the instructions for Transmitter programming. All programming

parameters are the same except for the following:

For Regular Remote Control Transmitter:

1. Prior to pushing any button on the transmitter. Press the Select II button first on the standard

transmitter.

2. Once II button is pressed the LED on the transmitter will illuminate for 3.5 seconds . While the

LED is illuminated, press the button for the function you want to operate on the standard

remote transmitter to control a second vehicle security system.

For 2-way LCD Remote Control Trans ceiver:

2nd Car Operation: While the "II" icon display on the LCD screen, you can remote control and

communicate with a second Autopage AM frequency security system. It has two short "bi"

sounds while pressing the button of the LCD screen transceiver

1. Press and hold all four remote control buttons simultaneously unit one long

beep is heard. LCD Programming has now been entered.

2. Within 5 seconds press and hold

heard and the "II" icon will display on the LCD screen to indicate the second

transceiver pin code has built-in.

3. To exit programming mode, take no action for five seconds. The remote

control will generate two long beeps to indicate programming mode has

been exited.

Back to 1st Car Operation:

You can remote control and communicate with a first vehicle security system. It has one short

"bi" sound while pressing the button of the LCD screen transceiver.

1. Press and hold all four remote control buttons simultaneously unit one long

beep is heard. Programming has now been entered.

2. Within 5 seconds press and hold

3. To exit programming mode, take no action for five seconds. The remote

control will generate two long beeps to indicate programming mode has been

exited.

Vibration / Melody Mode:

It is useful when you are in a noisy place and difficult to hear beep sound from the remote

control as the remote control in this mode, vibrates it if your security system is triggered.

1. Press and hold all four remote control buttons simultaneously unit one long

beep is heard. Programming has now been entered.

2. Within 5 seconds, press the

the

icon will displayed on the LCD screen to show the LCD remote

transceiver is on vibration mode.

3. To exit programming mode, take no action for five seconds. The remote control

will generate two long beeps to indicate programming mode has been exited.

Power Save Mode:

button until two beeping sounds is

button until one beeping sound is heard.

button to select the mode of vibration or melody,

Remark

Press within 5 seconds

Press within 3 seconds