Autopage RF-700 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Alarm samochodowy Autopage RF-700. Autopage RF-700 20 stron. Vehicle security system

4. AUDIBLE BREACH WARNING

In addition to the LED status indicator, the RF-700 is equipped with an audible breach warning to inform

you that the alarm has been triggered in your absence. Upon disarming, the siren or horn will chirp four

times, and the parking lights will flash four times.

5. ARM/DISARM CHIRP DELETE FROM REMOTE (M) or (P)

(Vehicle horn or siren)

The arm/disarm chirp sound may be deleted temporarily or permanently if desired. If deleted temporarily,

the chirp sound will return upon the next arm or disarm signal. If deleted permanently, arm/disarm

confirmation may be made via the flashing parking lights.

6. PANIC FUNCTION

The RF-700 remote control may be used as a remote control panic switch to trigger the horn or siren in

cases of emergency. To activate the PANIC FUNCTION press and hold the ARM or DISARM button

on the remote transmitter for a minimum of three (3) seconds. The vehicle horn or siren will sound. To

stop the PANIC FUNCTION press the DISARM button on the transmitter one more time.

NOTE: If the DISARM button is used to start the panic function be sure the alarm is rearmed before

leaving the vehicle.

7. TRANSMITTER BACKLIGHT (P)

The XT-64 transmitter is equipped with an internal backlight to aid in its use at night, or in dark areas

such as parking structures.

The internal backlight will light each time a transmitter button is pushed. It will stay lit from two to five

seconds depending on the function chosen.

NOTE: Extended use of the transmitter backlight when not necessary will diminish battery life more

quickly.

8. EXIT TRANSMITTER SETTING MODE (P)

The PROGRAM COMMANDS setting mode must be closed before any alarm protection is possible.