Galebreaker Bayscreen Instrukcja instalacji i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Sprzęt rolniczy Galebreaker Bayscreen. Galebreaker Bayscreen 16 stron.

Bayscreen

Fix the plain hooks (C1 or C2) into the screen loops (A1) and attach to left-hand

H-Beam, Figure 5(i).

Offer up the screen (A1) to the opening. Screens must be connected from pillar

to pillar, under no circumstances must they pass intermediate pillars or

obstructions.

If necessary trim the screen to the required length. For best results, use sharp

scissors / knife with a straight edge to remove the fabric either side of the

webbing strap ensuring all corners have a radius. Always remove surplus fabric,

do not just cut either side of the webbing that allows a loose flap, to be generated,

Figure 5(ii).

ATTENTION: Cut with care, do not cut through horizontal

webbing, and do not peel or remove the fabric off the back of the

webbing.

Figure 5, Fitting the Sheet

-7-

Installation

ENG