Autopage AP4000EX Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pager Autopage AP4000EX. Autopage AP4000EX 17 stron. Access point
Również dla Autopage AP4000EX: Instrukcja obsługi i instalacji (15 strony)

Drukuj stronę

NEGATIVE SWITCHING

SWITCH BODY

GROUNDED TO VEHICLE

POSITIVE SWITCHING

(MOST FORDS)

SWITCH BODY

ISOLATED FROM VEHICLE

4. The PINK wire is provided for the installation of optional AutoPage sensors for added security. Install and adjust the

chosen sensor according to the sensor's installation instructions.

5. Select a suitable location and install the CALL (*) button. Connect the GREEN wire

from the AP4000EX 6 wire harness to one side of the call button. Connect the remaining

wire from the call button to vehicle ground.

(*) Do not eliminate the CALL button. It must be used to program the pager.

CALL SWITCH

(MOMENTARY SWITCH)

6. Connect the BLACK main ground wire to a solid ground as close to the control unit as possible. Keep the ground

wire as short as possible.

TO INTERIOR LIGHTS

GRAY TRIGGER

INPUT WIRE

PURPLE TRIGGER

INPUT WIRE

TO INTERIOR LIGHTS

12 VOLT CONSTANT

SUPPLY FROM VEHICLE

[FIGURE 6]

GREEN