DCI C1103 Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprężarka powietrza DCI C1103. DCI C1103 17 stron. C series

150

BAR

100xkPa

psi

Loses less than 1 psi per min?

NO LEAKS!

150

BAR

100xkPa

psi

Step Nine:

Release air using the purge-valve

TEST button and watch the pressure

gauge to see when the motors start.

The motors should start when the

pressure drops to approximately 80 PSI.

You may have to push the TEST button

several times before enough air is

released to lower the pressure to 80 PSI.

Step Ten:

Open the outlet valve on the tank to

pressurize the piping and wait until the

tank is fully pressurized and the motors

stop running.

Step Eleven:

Ensure that no equipment is drawing

pressure from the tank. When no equip-

ment is drawing on the tank, pressure

should drop no more than 1 PSI per

minute.

Watch the pressure gauge. If pressure

drops faster than 1 PSI per minute, an

air leak is indicated somewhere in the

system. Repair as necessary.

1 .8 00.6 24.2 79 3

C Series Installation Guide

Start-Up & Test

Unpacking

Start-Up & Test