High Tech Pet Armor Flex Instrukcja instalacji - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Produkt do pielęgnacji zwierząt domowych High Tech Pet Armor Flex. High Tech Pet Armor Flex 16 stron. Low-e patio pet door
Drukuj stronę
STEP 28: Drill the Vacation Lock bolt hole
Position the Vacation Lock on the edge of your sliding glass door at the top or bottom with the Locking
Bolt extended. The end of the bolt should be facing your stationary door track as shown in Figure 30.
Using a pencil, trace around the circumference of the bolt on the stationary sliding glass door frame.
Then Remove the Vacation Lock and mark the approximate center position of the bolt. Drill a 1/4-inch
hole in your stationary sliding glass door frame for the bolt.
Fig 28C
Fig 28A
Fig 28AB
Drill the bolt hole
Position the lock and mark
Mark the bolt center
the bolt position
STEP 29: Drill the Vacation Lock mounting holes
The Vacation Lock provides added security. It may be attached to you sliding glass door at the top or
bottom. With the bolt extended and inserted into the drilled hole, position the Vacation Lock onto edge
of your sliding glass door and, with a pencil, trace the slots of the Vacation Lock onto the edge of your
sliding glass door. Note: Before drilling, Retract the bolt and make sure there is clearance between the
retracted bolt and your stationary door frame. Reposition the Vacation Lock if necessary, to make sure
there is clearance but, also making sure that the bolt is still centered on the hole. Drill (2) holes in your
sliding glass door using a #32 drill bit, one hole in the center of each of the slots you marked.
Fig 29B
Fig 29A
Fig 29C
Marked slots should look like this
Trace the 2 lock slots
Drill the center of each slot
15