AutoPets Feeder-Robot Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkt do pielęgnacji zwierząt domowych AutoPets Feeder-Robot. AutoPets Feeder-Robot 19 stron.
Drukuj stronę
Control Panel
Gravity Mode
Button
Power Button
Portion Button
Button Functions
Power: Press the Power button to turn the unit power ON or OFF.
All lights on the Control Panel will flash white and the Power button
light will remain solid blue indicating power is ON.
Gravity Mode: Press the Gravity Mode button to enable or disable
Gravity Mode. The unit will keep the Food Bowl full by checking the
food level every 6 hours, adding up to 1 cup at a time as needed to
keep the Food Bowl full. A 3-second long press of the Gravity Mode
button will enable or disable Night Mode (dimming lights).
Feed: Press the Feed button to feed a single serving of food. A
3-second long press will enable or disable Control Panel Lockout.
The Status Indicator Light (top of the unit) will flash white once
indicating Control Panel Lockout Mode has been set, and all
subsequent button presses will coincide with a red flash of the
Power button light. Locking the Control Panel with this feature will
ensure settings are not changed by accidental button presses.
Connect: Press the Connect button to turn WiFi ON or OFF. WiFi
connecting is indicated by a blinking blue light, and WiFi connected
is indicated by a solid blue light. A 3-second long press will initiate
the Onboarding process indicated by a blinking yellow light. Press
and release to exit Onboarding.
877. 250.7729 | feeder-robot.com
10
Feed Button
Connect Button
Meals Button
Gravity Mode
Button
Power Button
Portion Button
Portion: Sets the number of 1/4 cups dispensed in a meal. Press the
Portion button once to show the current quantity set (all 4 lights
blinking white indicates zero 1/4 cups set). Press the Portion button
again within 2 seconds of the first press to increment (from left to
right) the number of 1/4 cups per meal. Settings will be saved upon
the last button release.
Meals: Sets the number of meals served in a 24 hour period -
starting from the time of the setting. Press the Meals button once
to show the current quantity of meals set (all 4 lights blinking white
indicates zero meals set). Press the Meals button again within
2 seconds of the first press to increment (from right to left) the
number of meals served in a 24-hour period. Settings will be saved
upon the last button release. Note: Program will not initiate unless
both Portion and Meals have non-zero settings.
877. 250.7729 | feeder-robot.com
11
Feed Button
Connect Button
Meals Button