Autoplugin Therminal V2 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Elektronika samochodowa Autoplugin Therminal V2. Autoplugin Therminal V2 12 stron.

Open the case of GSM-module to install SIM card, as shown at the picture 1. Use

screwdriver from package to remove screws.

Figure 1

Plug-n-Play Connection

This type of connection uses OBD-II service connector. It placed at the left lowest

point of the dashboard. Open the case of service connector (if applicable). Take

interconnection cable and connect RCP and GSM modules together. Only

highlighted at the figure 2 connectors are used. Take Plug-n-Play cable and

connect it to interconnection cable. Find a place inside the dashboard for modules.

RCP and GSM modules can be joined to the packet using double-sided adhesive

tape (see fig. 2). Secure packet of modules inside the dashboard with straps. If

modules are placed separately, RCP module can be fixed with adhesive tape, and

GSM module can be fixed with straps. Pay attention that internal antenna of GSM

module (marked by dashes at figire 2) doesn't stay close to metal parts of the