Galileo G-760BG Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Teleskop Galileo G-760BG. Galileo G-760BG 10 stron.

ASSEMBLY INSTRUCTIONS

REMOVE PRE-ASSEMBLED TRIPOD

2. ADJUST TRIPOD TO PROPER HEIGHT BY LOOSENING,

ADJUSTING AND TIGHTENING THE LOCKING KNOBS.

3. REMOVE TELESCOPE AND MOUNT FROM CARTON.

NOTE: THEY COME PRE-ASSEMBLED FROM THE FACTORY.

4. LOOSEN MOUNTING KNOB ON THE TELESCOPE

MOUNT (UNDERNEATH)

5. PLACE THE TELESCOPE AND MOUNT ASSEMBLY

ONTO THE TOP OF THE TRIPOD.

6. TIGHTEN LOCKING KNOB (UNDERNEATH THE TRIPOD TOP) SECURELY.

7 ATTACH ACCESSORY TRAY AS SHOWN.

8. REMOVE ELECTRONIC MARS-EYE FINDER.

9. USE THE TWO THUMB SCREWS TO POSITION THE

ELECTRONIC MARS-EYE FINDER ON THE TELESCOPE

TUBE. FOR ADDITIONAL HELP SEE THE PAGE IN YOUR

INSTRUCTION BOOK FOR ELECTRONIC MARS-EYE FINDER

MOUNTING AND ALIGNMENT.

NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

GALILEO G-760BG

CAUTION: NEVER POINT YOUR TELESCOPE

AT THE SUN. VIEWING THE SUN

THIS TELESCOPE OR EVEN THE UNAIDED

EYE CAN RESULT IN BLINDNESS OR OTHER

SERIOUS EYE DAMAGE.

WITH

WASHER

KNOB