DCN S5750E-28F-SI-R Podręcznik - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik DCN S5750E-28F-SI-R. DCN S5750E-28F-SI-R 19 stron.

S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0)

The connection procedure is shown below:

Find the console cable provided in the accessory kit. Attach the Mini-USB end to

console port of the switch.

Connect the other side of the console cable to a character terminal (PC).

Power on the switch and the character terminal. Configure the switch through the

character terminal.

2.3.3 SFP Transceiver Installation

S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series provide multiple 1000Mb SFP transceiver

slots.

The procedure for installing SFP transceiver is shown below:

Step 1: Put on a ESD wrist strap (or antistatic gloves).

Step 2: Insert SFP transceiver to the guide rail inside the fiber interface line card. Do not

put the SFP transceiver up-side-down.

Step 3: Push SFP transceiver along the guide rail gently until you feel the transceiver snap

into place at the bottom of the line card.

Note: SFP transceiver supports the hot swap.

Caution!

Do not stare directly at the 2 fiber bores in the SFP transceiver when the switch is in

operation, otherwise the laser may hurt your eyes.

Fig 2-2 Connecting Console to switch

2-7

Chapter 2 Hardware Installation