GalileoSky v 5.1 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla GPS GalileoSky v 5.1. GalileoSky v 5.1 10 stron. Switching on devices for the first time

Switching on Galileosky 5.0, 5.1 Devices for the First Time

version 6 dated from June 19, 2018

Monitoring Software Setting

The next step is to configure the monitoring program to which the data from the device

should be sent. The settings order is the following:

Start the monitoring program and go to monitoring object creation section;



Specify the name of the object (any), type of the object «GALILEOSKY v 5.0», in



unique ID field enter the IMEI of the device;

Initial setup is completed. Go to the "Monitoring" tab and check the monitoring object

state (Pic. 12).

In case of any failure, it is possible to view the information about the operation of the

device in the "Troubleshooting" tab of the Configurator. To execute the troubleshooting

put ticks in the entries required.

Pic. 11

Monitoring object setting

Pic. 12

Monitoring Software tab