Highendled YHLL-001TZ 4IN1 LED Par Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Światło powodziowe Highendled YHLL-001TZ 4IN1 LED Par. Highendled YHLL-001TZ 4IN1 LED Par 7 stron.

Drukuj stronę

AUTO

Jumping mode set

RUN

Speed set

MODE

Zoom

STATIC

Static Color select

COLOR

Strobe

SELECT

MODE

Zoom

Display

on/off

OTHER

Display

MODE

normal/inversed

Initialization

mode

Reset mode

Manual Dimmer Color Mode

1. Press MODE button until you select red dimmer color r(XXX). Continue pressing the SET UP to

choose different color,green G(XXX), blue b(XXX) or white u(XXX).Then continue pressing the SET

UP to select strobe mode FS(XX) and the zoom mode Z.(XXX).

2. Press UP or DOWN to adjust the intensity of the red,green,blue or the white color 0-255 ,the speed of

the strobe in the strobe mode and the beam angle from big to small.

0-Off Strobe

Static Color Select Mode

1. Press MODE button until you select CL(XX). Then continue pressing the SET UP to select strobe

mode St(XX) and the zoom mode Z.(XXX).

2. Press UP or DOWN to select static color 0-15 ,the strobe speed in the strobe mode and the beam

angle from big to small.

0-Off Strobe

Auto-Run Program Mode

Two Auto-Run styles are built into the YHLL-001Z 4 in 1– Continued Color change program(AJ-X), Color

Mixing (AF-X).

1. Press "MODE " button until you select AJ-(X) .Continue pressing SET UP to choose Color Mixing

AF-(X),and continue pressing SET UP to reach the SP(XX) Auto-run Speed Set Mode and the zoom

Mode Z.(XXX).

2. Press UP or DOWN to select the built-in AJ-(X) Continued Color change program 1-8 ,the built-in

1-Lowest Speed

15-Highest Speed

1-Lowest Speed

15-Highest Speed

Select the built-in jumping mode

Adjust the speed of the dreaming/snap

program mode

Adjust the beam angle from big to small

Select the 15 static colors

Adjust the strobe speed,

off,

Adjust the beam angle from big to small

LED digital tube display always on

LED digital tube display off

LED digital tube display normal

LED digital tube display inversed

Initialize the unit at the extra factory setting

Reset the position of the electric machine

3 of 7 pages

is slowest,

is fastest

is flash