Afinia L301 Podręcznik szybkiej konfiguracji i instalacji - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji i instalacji dla Urządzenie do tworzenia etykiet Afinia L301. Afinia L301 4 stron.
Drukuj stronę
Control Panel LEDs
The LEDs on the control panel indicate a number of printer states:
Green LED
Off
Slow Blink
Always On
Slow Blink
Always On
On or Blink
On
Slow Blink
For technical questions or support issues, contact Afinia Label Technical Support:
Please have the Serial Number of your Afinia Label L301 Label Printer available when contacting
Technical Support.
Red LED
Display
Off
Fast Blink
Fast Blink
Off
Off
Always On
"Printing...",
Blink
"Cancelling..."
"Out of
Blink
Paper"
PH: 952-279-2643
www.afinialabel.com/support
1. Power cable not plugged in
Off
2. Plugged in, but power button
not pressed
Off
Power cable was just plugged in
On
Printer powering up
On
Printer on, no stock loaded
Printer on, stock loaded (ready)
On
Cutter not in Home position (fully
On
left or right)
Printer is paused in this state
Incorrect Media type; cut required.
Perform cut and move cutter to
home position.
After cut, media will unload. Load
correct media and touch OK to
print or touch Cancel
Cut required.
Perform cut and move cutter to
home position.
After cut, media will unload. Load
media and touch OK to print or
touch Cancel