Dynatech QUASAR-SV Instrukcja obsługi i konserwacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Systemy podnoszenia Dynatech QUASAR-SV. Dynatech QUASAR-SV 13 stron. Overspeed governor

Drukuj stronę
INSTRUCTIONS: QUASAR SV Code: DYN 64.1.06
Date: 08/11/2016 Revision: 06

1 GENERAL INSTRUCTIONS

DYNATECH's QUASAR SV overspeed governor was specially designed to be fitted in the lift's car or frame and
move along with them.
The governor moves along the hoist way whereas the rope remains fixed attached to the shaft and pit's ceiling via a
tensioning system. The information about the devices making up the Governor will be extended further on.
The Quasar SV governor is a governor with reduced dimensions (120 mm pulley diameter). It was designed so as to
save space.
It is strictly forbidden:
a) To modify or replace the overspeed governor adjustment spring.
b) Use an overspeed governor in a lift for which it is not intended, or whose features do not correspond to those
marked on the lift (e.g. nominal speed or rope type).
c) To adjust any component of the overspeed governor, except for those parts specified in the manual.
DYNATECH DYNAMICS & TECHNOLOGY, SL will not be liable for any damage caused by failure to observe any of
these general conditions.

2 OVERSPEED GOVERNOR IDENTIFICATION

3 MAIN COMPONENTS OF THE GOVERNOR

The overspeed governor is made up of the following main elements: One main pulley with centrifugal system, one
diverter pulley, a centrifugal system, a locking part and a component linking the governor to the car or frame.
A picture displaying the governor as a whole can be seen below:
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/
OVERSPEED GOVERNOR IDENTIFICATION LABEL
1
Governor model
2
Governor type
Performance speed
3
(m/s)
4
Rated speed (m/s)
5
Serial number
6
Rope diameter (mm)
7
QR product traceability code
8
Dynatech address
Quality assurance CE marking
9
and notified body number
EU type examination certificate
10
number
1