Emerson 2100 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Emerson 2100. Emerson 2100 12 stron. Emergency pressure relief vent and manhole cover
Drukuj stronę
Installation
▲
WARNING
The 2100 Series is shipped with its lid
held partially open. The lid assembly has
attached weights and is heavy. Use caution
when removing the shipping blocks and
metal bands to avoid injury to fingers
and hands.
Prior to installation, remove the unit from its crate
and discard any protective coverings. Follow the
recommended instructions for the installation of the
2100 Series.
1. Carefully remove the 2100 Series from its crating.
Note
The seal portion of the vent can be
damaged through improper handling,
protect this surface with a padding
material while transporting the unit
if possible.
▲
WARNING
Failure to use spreader bar in lifting the
unit may result in personal injury, damage
to the unit and damage to the equipment.
Figure 8. Installation Configuration
Figure 9. Final Installation
There should be no tension on the
lanyards if the unit is to be hoisted in
position, failure to do so may result in
damage to the unit.
2. Use an appropriate spreader bar when lifting
the unit by the installed eyebolts. If the complete
unit is to be hoisted into position using installed
eyebolts, first secure the base to the lid so that
there is no tension on the lanyards. Lanyards are
load-rated to 350 lbs / 160 kg each; damage to
other components may occur.
3. Install the 2100 Series on flange bolt patterns that
match that of the vent itself. If a matching pattern
is not available, please contact your local Sales
Office for an adapter. The attachment flange
base must be a level surface. Use an appropriate
gasket placed between the 2100 Series flange and
the attachment flange, center the vent into place.
4. Insert the appropriate number of bolts and make
sure the vent is fastened securely. Installed bolts
should be clear of the lid assembly when it is in
the full open position. Remove any spacer or seal
protection and inspect the now installed unit for
items that would keep it from working properly.
The sealing area should be free of any debris or
damage that would cause leakage.
2100 Series
5