Autoquip Piston Air Eco-7M Engine II Series Instrukcja instalacji i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Silnik Autoquip Piston Air Eco-7M Engine II Series. Autoquip Piston Air Eco-7M Engine II Series 12 stron.
Drukuj stronę
6. Apply a small amount of grease to the crank bearing. Piston kits are
supplied greased. Do not fill the crankcase with grease, as this impairs
operation. New engines are supplied greased with approximately 16
grams.
7. Re-connect the air supply, making sure the pressure is at zero.
8. Slowly increase the air pressure to approx 1 – 1.25 bar (15-20 psi) the
engine should start to rotate slowly.
9. Disconnect air supply and replace rear cover.
www.aqautomation.com