HighGear Loft Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oglądaj HighGear Loft. HighGear Loft 19 stron. Altiware series

Drukuj stronę

TIME FUNCTIONS

SECONDARY TIME MODES

While time is always displayed in the center of the screen, the time display has three additional secondary display

options which are accessed by a QUICK PRESS of the S1 or S3 key. In response to a QUICK PRESS, the top line of the

display will display the name of the function being displayed followed by the information. The secondary display options

are as follows:

SCREEN ONE

This is the default display when you enter the Time screen.

TOP LINE: Day/Date

CENTER LINE: Time of Day

BOTTOM LINE: Current Temperature

SCREEN TWO

TOP LINE: Graph showing Sea Level Barometric Pressure Trends over the past 24-hrs

CENTER LINE: Time of Day

BOTTOM LINE: Current Barometric Pressure adjusted to Absolute Barometric Pressure

For more information on the barometric pressure graph see the section of this

manual covering the barometer functions.

SCREEN THREE

TOP LINE: Graph showing Sea Level Barometric Pressure Trends over the past 24-hrs

CENTER LINE: Time of Day

BOTTOM LINE: Current Temperature

All three displays also have an icon in the upper right corner showing a visual

representation of the current weather.

WEATHER ICONS: In all screens, to the right of the top line are icons which display a

forecast of the weather over the next 6 hours. (See page 14 for more information on the

weather icons.

The temperature sensor measures the temperature of the watch unit. If worn on

your wrist or exposed to direct sunlight, the sensor may read artificially high. For

accurate temperature readings, remove the watch from your wrist and place in a

shaded area for 10-15 minutes.

ALTIWARE SERIES

BAROMETER FUNCTIONS

The Loft is equipped with a highly sensitive barometer/weather station. The barometer measures the actual barometric

pressure at your location and calculates the barometric pressure corrected to mean sea level. You can choose to display

barometric pressure in either Inches of Mercury (inHg) or Millibar/Hectopascals (mbar/hpa). In the barometer display, the

top line of the display always shows a graphic representation of the sea level barometric pressure over the past 24-hours.

This graphic display updates once an hour and is the same graph as is displayed in the sub-functions of the Time mode.

SET WEATHER AND SEA LEVEL BAROMETRIC PRESSURE

There are four different Icons for weather. SUNNY , PARTLY CLOUDY

icon which most closely matches the weather at the present time. The watch will track changes to barometric pressure

over time and change the icon being displayed to estimate what the weather will be like for the next 6-hours.

1. Advance to BAROMETER (BARO) display using QUICK PRESSES of the S4 key

2. PRESS & HOLD the S5 key to enter setting sequence

3. Adjust current weather using QUICK PRESSES of the S1 and S2 keys

4. Set current weather and advance to setting barometric pressure using a QUICK

PRESS of the S4 key

The local barometric pressure corrected to Mean Sea Level (MSL) may be adjusted if desired

to achieve the highest levels of accuracy.

5. Adjust corrected sea level barometric pressure using S1 and S2 keys

6. Set barometric pressure using a QUICK PRESS of the S5 and exit the barometer

setting sequence.

Do not randomly adjust the barometric pressure setting of the watch. Inaccurate

setting of the barometric pressure may result in inaccurate altimeter and weather

readings. If you are not certain of the proper use of this function, it is better to leave

this variable at its factory setting.

, CLOUDY

and RAIN

. Choose the

LOFT