HighGear Compass Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kompas HighGear Compass. HighGear Compass 19 stron. Highgear enduro compass compass: user guide

Drukuj stronę

REPLACING THE WATCH BATTERY

The Enduro watches use a common CR2032 3v Lithium battery. Normal battery life is

approximately 1yr.

NOTE: Heavy usage of the Compass or Backlight system may significantly

reduce battery life.

NOTE: A blank display or inaccurate compass readings are indications that the

battery is getting weak and should be replaced.

Remove battery door using a coin.

Carefully remove the old battery. Do not damage the O-ring

seal.

Place a fresh battery in the battery compartment with the

positive (+) side facing up.

Replace battery door using a coin.

If the O-ring has been damaged, replace it before reinstalling

the battery door. Most jewelers and watch shops should

have replacement O-ring seals.

NOTE: Extreme care should be taken when replacing the battery to ensure the

unit remains fully water resistant. Failure to properly replace the battery and

correctly seal the unit may cause the unit to become damaged and may void the

warranty

RESETTING THE WATCH

To reset the watch back to its default values

MODE, SET/CLEAR,

START/LAP

and

down at the same time. The display will light up showing all

segments followed by a sequence of screens showing various

numbers. The watch will then automatically change to the time

of day screen at 12 o'clock on the first of January.

Resetting the watch will clear any information stored in the

watch. This should be done only as a last resort.

PRESS

the

STOP/NEXT

keys