Highland HP4IC-2 Instrukcja obsługi i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Płyta grzewcza Highland HP4IC-2. Highland HP4IC-2 16 stron. Induction cooktop
Drukuj stronę
Timer
The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
To stop the cooking time :
Action
Zone selection
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.
Egg timer function :
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.
Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning
the control panel can be locked (with exception to the On/Off key [
Locking :
Action
Start
Hob locking
Control panel
Press key [ O ] from the zone
Press key [ + ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ O ] key
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Control panel
Press key [
]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [
]
Press simultaneously [ - ] and [ O ]
at front right
Repress key [ O ]
9
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ] min
[ 00 ] wents to 30,29....
time increase
Display
[ 0 ]
The remaining time
[ 00 ] then stops
Display
4 x [ 0 ] or [ H ]
Timer [ 00 ] min
[ 00 ] wents to 30,29....
time increase
]).
Display
4 x [ 0 ] or [ H ]
No modification
4 x [ L ]