Galleon AC-400-GPS Instrukcja instalacji i konfiguracji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji i konfiguracji dla Antena Galleon AC-400-GPS. Galleon AC-400-GPS 12 stron.

SETTING UP THE UNIT

Choose an area to mount the GPS Antenna; the ideal place would be the roof of the building with a clear

view of the sky (GPS). You need to ensure that the antenna is installed close to a power supply that is

sheltered from the elements. Things to avoid are air conditioning units and power distribution units, as

these will cause electrical interference. Alternatively, the antenna can be placed by a window with a good

view of the sky, however, a consistent GPS connection cannot be guaranteed.

Connect the AC-400-GPS to a Computer via the Serial RS232 cable. Connect the computer to the network

using a standard RJ-45 cable.

The cable should be run from the server or workstation to the selected mounting position.

Please note that it is a good idea to leave some slack cable in case you need to move the server or

workstation later. Also the maximum cable length should not exceed 100m.

Once everything is connected up, the AC-400-GPS can then be powered up. The unit will start up and will

begin to search for GPS satellites to synchronise with.

You will also need to set up the TimeSync software. To do this, please refer to the TimeSync Manual.

www.galsys.co.uk

galleonsupport.com

AC-400-GPS

TEL:

+44 (0) 121 608 4433

FAX:

+44 (0) 121 608 4477