GALLERY 60 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe GALLERY 60. GALLERY 60 18 stron. Canvas stretching machine

Drukuj stronę
4. Once the artwork is aligned lay the "starter course" using a pneumatic staple gun. Be
sure that the artwork stays parallel to your edge. Adjust air pressure of staple gun so
that the staples due not penetrate the canvas.
6. Place the stretcher frame on top of the stretcher plates with the starter course away
from the operator. This is called the "loaded position".
Note the position of the stretcher bar against the "mechanical stops".
10