DCS EH-36SS Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Okap wentylacyjny DCS EH-36SS. DCS EH-36SS 14 stron. The professional euro vent hood
Również dla DCS EH-36SS: Instrukcja użytkowania i instalacji (18 strony), Instrukcja obsługi i konserwacji (11 strony), Instrukcja obsługi i konserwacji (7 strony), Instrukcja instalacji (16 strony)

Drukuj stronę

PLANNING/INSTALLATION INSTRUCTIONS

WARNING

To reduce the risk of fire or electric shock, DO NOT use this fan with any solid

state speed control device.

CAUTION

For General Ventilating Use Only. Do Not Use To Exhaust Hazardous or

Explosive Materials and Vapors.

TOOLS NEEDED FOR INSTALLATION

Saber Saw or Jig Saw

Drill

Wood Drill Bit

1/4

Pliers

Phillips Screwdriver

Flat Blade Screwdriver

Wire Stripper or Utility Knife

Metal Snips

Measuring Tape or Ruler

Level

Pencil

Caulking Gun

Duct Tape

This Euro Hood can be installed with (Fig. 05) or without (Fig. 06) an

optional telescopic chimney kit (model #ECD-2SS). In a ducted

application, this Euro Hood can be vented through the wall or ceiling. To

vent through a wall, a 900 elbow is used. When installing ductless with a

chimney kit, the Euro Hood vents out of grates on the sides of the

ductless chimney kit (model #ECND-2SS). This ductless installation also

requires a charcoal filter kit (model #ECF).

without the optional chimney kit, some ductwork must be installed to

divert the air out of the cabinet. This installation requires charcoal filter

kit (model #ECF). See page 10 for more details on all ductless instal-

lations.

WARNING:

Before making any cuts or holes for installation,

determine which venting method will be used

and carefully calculate all measurements.

Standard installation for the Euro Hood requires the canopy to be mounted 30" above the countertop

(Fig. 07). The optional telescopic chimney kit can be adjusted for ceilings between 8' 2 3/16" and

9' 8 5/16" (Fig 07).

PARTS SUPPLIED FOR INSTALLATION

1 Hardware Package

1 Literature Package

PARTS NEEDED FOR INSTALLATION

2 Conduit Connectors

Power Supply Cable

1 Wall or Roof Cap

All Metal Ductwork

OPTIONS/ACCESSORIES

Telescopic Chimney Kit (model #ECD-2SS)

Ductless Chimney Kit (model #ECND-2SS)(Fig. 03)

Charcoal Filter Kit (model #ECF)(Fig. 04)

When installing ductless

FIG.03

CHARCOAL FILTER

FIG.04