GALLERY STRETCHER-240 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy owijania folią stretch GALLERY STRETCHER-240. GALLERY STRETCHER-240 17 stron.

4. Once the artwork is aligned create the "starter course" using a pneumatic staple
gun. Be sure that the artwork stays parallel to your edge. Adjust air pressure of
staple gun so that the staples due not penetrate the canvas.
5. Place the stretcher frame on top of the stretcher plates with the starter course away
from the operator. This is called the "loaded position".
Note the position of the stretcher bar against the "mechanical stops".
10