Copernicus TEC700 Instrukcja montażu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Ładowarka Copernicus TEC700. Copernicus TEC700 12 stron.

Drukuj stronę
Actual Size:
1
You will need:
Install Hardware on Power Strip and Mount to Tech Tub
Choose the side you would like to mount the power strip on
Right
1
Install screws in power strip
7
A
M3 x 12mm
2x
(Not to Scale)
You MUST assemble the power strip on
back face if you are using your Tech Tub™
with TEC714 & TEC728 carts.
Tighten bolts
once in place
It may take some force to fit the
screw head into the keyhole slot.
Use pliers to help slide the screw
head into the keyhole slot.
TEC700 - Version D - Released December 16, 2014 - Copernicus Educational Products Inc.
B
M3 Lock Washer
2x
Tech Tub
1x
Back
2
Install power strip to the Tech Tub™
C
Flat Washer
2x
TM
TM
Make sure outlet
cable end if pointed
towards the back of
the Tech Tub™
Tighten fully
B
C
D
D
M3 Wing Nut
2x
Power Strip
1x
Left