Copland CSA70 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Copland CSA70. Copland CSA70 9 stron.

GETTING STARTED

Open the carton and remove the amplifier from its plastic bag. Before placing the unit in your

home, read this carefully.

CAUTION!

Various regulation agencies require us to bring the following information to your attention.

Please read carefully.

WARNING

To prevent fire or shock hazard, do not expose this unit to rain or moisture.

Check that your supply voltage is the same as indicated.

Dangerous voltage inside. Do not open the cabinet without disconnecting the

mains power cord.

There are no user serviceable parts inside. Repairs should be carried out by

qualified service personnel only.

Ensure that no objects or fluids pass through the ventilation openings.

If liquid is spilled into the amplifier, disconnect from the mains and consult a

qualified service technician.

Allow adequate clearance so that cool air can enter at the chassis ventilation holes.

Never place the amplifier on a carpet or similar surface that obstructs air circulation through

the unit.

The trouble-free life of an amplifier is greatly extended by providing sufficient ventilation to

prevent build-up of high internal temperatures that cause deterioration.

The recommended minimum ventilation space is 50 cm wide and 30 cm high.

Input / Outputs

Apart from the headphones, all connections are on the back panel of the amplifier.

Use shielded cables to connect the signal source to the amplifier input. To minimise the

possibility of hum, the shielded cables should run parallel to each other or loosely twisted

together. Locate the cables away from speaker leads and AC power cords.

AC Power

The amplifier AC power cord is plugged into an 115V/120V/230V/240Volt. 50/60 Hz wall

outlet. The right voltage is indicated on the back panel beside to the AC power inlet.

Check that your supply voltage is the same as indicated on the amplifier back panel.