Dynaudio S4-W65 Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Głośniki Dynaudio S4-W65. Dynaudio S4-W65 12 stron. Studio series
Również dla Dynaudio S4-W65: Instrukcja instalacji (16 strony)

Drukuj stronę

Diagram 2

S4-W80

96 mm

(3.80 in)

215 mm (8.25 in)

370 mm (10.83 in)

2.2 Back Boxes

Studio Series speakers can be installed with back boxes in order

to reduce sound transmission into adjacent rooms or to satisfy

any local statutory building regulations. If back boxes are to be

used they must be installed within the walls and ceilings before the

drywall (plasterboard) is affixed to the studs or joists. Alternatively,

the existing drywall (plasterboard) around each speaker installation

position may be removed to enable a back box to be installed, and

reinstated following back box installation. Further information on

Dynaudio back boxes can be found at dynaudio.com.

Generic back boxes from alternative manufacturers can be used,

or back boxes may be constructed on site. In either case, Studio

Series speakers require a 22 Litre (0.8 ft3) minimum back box

volume in order to reach their full audio performance potential.

Before commencing any Studio Series installation you must be sure

that the wall and ceiling positions chosen are free of obstructions

such as pipe work, ducting or wiring that might interfere with the

installation. Stud-finding, pipe detecting and wire detecting tools

can help map the wall construction and identify any potential

obstructions.