Dynaudio Audience SUB-30A Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Subwoofer Dynaudio Audience SUB-30A. Dynaudio Audience SUB-30A 19 stron.

Level

The level control knob allows for subwoofer output matching to the system. To obtain a

neutral sound balance it is important that the subwoofer level is set correctly. To do this,

adjust the control up and down until a natural sounding bass level is obtained in the system.

Readjustment is recommended if any crossover and/or phase settings are changed on the

subwoofer.

With the variable low-pass filter, it is possible to adjust the subwoofer to accurately

compliment the main speakers and obtain optimum performance. Adjusting the frequency

between 60 Hz and 120 Hz allows for the best transition from the subwoofer to the point

where the main speakers roll-off.

The Audience SUB is equipped with advanced phase adjustment circuit, enabling for proper

phase alignment with the audio system.

The phase control knob enables variable phase settings between 0° to 180° or 180° to 360°

depending on the slide switch position.

Using the control knob and slide switch, adjust the phase until the most coherent and

quantitative bass is heard at the normal listening position.

Optimum adjustment can be checked by temporarily sliding the switch to the opposite

position. If correct phase adjustments are achieved, this will create a preceived reduction in

output level.