DCS LDT-M1 Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów DCS LDT-M1. DCS LDT-M1 15 stron.

If for rigging purpose a lens motor or lens encoder need to be reverse:

M enu > ECS > LBUS Lens Motor Config

● Choose:

Left

on one of the axes.

Transfer a Lens Table

Users can select a lens file stored on the SD card in their WCU-4 and using just the hand unit

wirelessly transmit the file to the ALEXA Mini, saving time and effort.

To transfer a lens file, insert the SD card with lens files on it into the SD card slot of the WCU-4:

● Go to MENU > LENS DATA > LENS FILE TRANSFER,

● Select LENS FILE TRANSFER.

Use the UP, DOWN and SELECT soft buttons or zoom stick and User button to navigate through

the folder structure on the SD card and select a lens file.

Press SEND to transmit the lens file wirelessly to the camera device. The transferred lens file is

activated immediately.

If the lens file transfer does not work wirelessly then you need to use a computer to transfer the

lens file from the WCU-4 SD Card to a USB Drive and place it inside the LDA folder. Then load the

files into the camera.

Testing the Lens Table

Once the lens file has been transferred to the Alexa Mini, switch off the WCU-4 and turn on the

Preston Hand Unit:

● Choose MENU > Electronic Control System (ECS) > Lens data > Clear,

● Choose MENU > Electronic Control System (ECS) > Lens data > LDA,

● Select the Lens Table corresponding to the mounted lens,

● Calibrate the lens using the calibration button on the LDT-M1,

● Check if the lens lines up with the lens data into ECS or by using the monitor overlay.

LDT- M1 User Manual

R ight

and select