DCS LDT-M1 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów DCS LDT-M1. DCS LDT-M1 15 stron.

OK or the user button to confirm. Now repeat the above steps in order to populate your lens

table. Work through each engraved value on the lens to ensure maximum precision. Use the

Down button to edit any data points.

Once all focus values have been entered press finish to save. Press OK to return to the Select

Axis Screen.

Mapping the Iris Axis

Use the iris slider to move through the span of the axis, ensuring that it reaches each

end of the lens. If not, check if there were any slips during calibration.

Now move onto mapping the Iris by pressing the Iris button.

Set the iris to wide open. Use the up and down buttons or the zoom stick to select the open iris

value. Press the OK or User button to confirm.

Now work through the rest of the Iris marks. Move the iris slider to the next engraved mark on

the lens and press the OK or user button to confirm and repeat until all the desired marks are

entered.

When finished press the OK button or the Finish button

Mapping the Zoom Axis

If encoding a zoom lens press the Zoom button.

Use the zoom stick to move through the span of the axis, ensuring that it reaches each

end of the lens. If not, check if there were any slips during calibration.

Use the iris slider to move the zoom axis. Set the zoom to its widest zoom mark then use the up

and down buttons or the zoom stick to set the wide focal length on the handset. Press the OK or

User button to confirm the focal length.

Move the zoom scale to the next focal length mark. On the handset use the up and down

buttons or zoom stick to set the focal value length. Press the OK or User button to confirm the

value. Repeat for the rest of the focal length points.

After entering all focal length points, press the OK b utton to return to the S elect axis s creen.

Once completed press the OK button to return to the Select Axis Screen.

LDT- M1 User Manual