DCS DishDrawer DD24SVT7 Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka DCS DishDrawer DD24SVT7. DCS DishDrawer DD24SVT7 16 stron. Dishdrawer
PARTS SUPPLIED
2
Drain hose
Drain hose
support (1)
joiner (1)
Edge Protector (1)
(If the services hole is through
a metal partition the hole
must be protected with the
Edge protector supplied to
prevent damage to the power
cord or hoses.)
If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11' 10" (3.6m).
The kit is available from the nearest DCS by Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.dcsappliances.com
Side mounting
Wire clip (1)
bracket kit
(for securing
(A and B) (2)
Drain hose joiner)
OPTIONAL
Clamp (1)
Phillips
5⁄8" (16 mm)
(for securing
screws (7)
Drain hose joiner)
Rubber
1½ " (38 mm)
washer for
bottom fixing
inlet hose (1)
screws & metal
(comes already
washers (2)
fitted)
4
Moisture protection
tape (1)
(to prevent moisture
damage)