HighPoint HPT372 Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy HighPoint HPT372. HighPoint HPT372 16 stron. Ata raid controller for red hat linux
Drukuj stronęHPT370/372/372A Red Hat Linux Installation Guide
a. Since current driver does not support SMP, you should disable SMP support
by deselecting the option " Processor type and features->Symmetric
multi-processing support" .
b. Enable kernel versioning option by selecting " Loadable module
support->Set version information on all module symbols" .
c. Configure SCSI support and SCSI disk support as module by setting " SCSI
support->SCSI support" and " SCSI support->SCSI disk support" as
module.
d. Enable initial RAM disk support by selecting " Block devices->RAM disk
support" and " Block devices->Initial RAM disk (initrd) support" .
e. Enable loopback device support by selecting " Block devices->Loopback
device support" .
f. For convenience, you can enable the option " File systems->DOS FAT fs
support" to easily access DOS floppies.
When you finish, select " Exit" and save the kernel configuration when
prompted.
5) Type in the following command:
# make dep
Note
1.For RedHat 7.0/7.1, the file /usr/src/linux/include/linux/modversions.h may
be incorrect after " make dep" in some Red Hat Linux distributions. Please
check if there is a line " #include <linux/rhconfig.h>" before " #include
<linux/modsetver.h>" in that file. If not, you should add the line manually.
2.For RedHat 7.2, you have to check kernel version after running " make dep" .
The UTS_RELEASE define line in /usr/src/linux/include/linux/version.h
should be
If not, correct it using an editor (eg. vi)
6) Type in the following command to build the kernel image:
# make bzImage
If the kernel is built successfully, you can copy the new kernel file
/usr/src/linux/arch/i386/boot/bzImage to /boot directory.
# cp /usr/src/linux/arch/i386/boot/bzImage /boot
For more information on how to build and install a new kernel from kernel source,
please refer to Linux kernel documents. The Kernel-HOWTO document gives a
detailed guide to kernel configuration, compilation, upgrades, and troubleshooting.
2. Using the kernel on the driver diskette
#define UTS_RELEASE " 2.4.7-10"
- 6 -