HighPoint R1508 Instrukcja szybkiej instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Sprzęt komputerowy HighPoint R1508. HighPoint R1508 11 stron. 8x m.2 port to pcie 4.0 x16 nvme hba
Również dla HighPoint R1508: Instrukcja szybkiej instalacji (11 strony), Instrukcja szybkiej instalacji (6 strony)

Drukuj stronę

Step 8. After installing all NVMe SSDs, carefully flip the heatsink to

the right.

Note:

Make sure the NVMe SSDs are carefully, but securely

installed into each M.2 port. Loose connections can cause a

variety of stability and performance issues, and may ultimately

result in data loss.

Step 9. Carefully reinsert in the power supply cable of the cooling fan

that was removed in step 2.

Step 10. On the rear of the R1508, refasten the 6 screws that were

removed in step 1.

Note:

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the

thermal pad, before refastening it to the R1508. If the cover is