HighPoint RR3740 Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy HighPoint RR3740. HighPoint RR3740 15 stron. Pci-express 3.0 x8 raid controller
Również dla HighPoint RR3740: Instrukcja szybkiej instalacji (9 strony), Instrukcja instalacji (15 strony)

Drukuj stronę

Linux CentOS on RR3740/3720/2840/840/3742/710/720 Installation Guide

sh rr37xx_8xx_28xx_linux_x86_64_src_vxx.x.x_xx_xx_xx.bin or

./ rr37xx_8xx_28xx_linux_x86_64_src_vxx.x.x_xx_xx_xx.bin

k. Follow the prompts to complete the driver installation.

After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/rr3740a /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/rr3740a /x

This command will show the driver version number, physical device list and logical device

list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to RR Series RAID controller. Installation of the

management software is optional but recommended.

Please refer to HighPoint RAID Management Software documents for more information.

- 9 -