HighPoint SSD7000 Series Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy HighPoint SSD7000 Series. HighPoint SSD7000 Series 12 stron. Linux rocky linux
Również dla HighPoint SSD7000 Series: Instrukcja instalacji (16 strony), Instrukcja instalacji (14 strony)
Drukuj stronę
Linux Debian on SSD7000 Installation Guide
l.
Follow the prompts to complete the driver installation.
m. After the installation is complete, you can perform system update operations.
3 Monitoring the Driver
Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/hptnvme /x
This command will show the driver version number, physical device list and logical device
list.
4 Installing RAID Management Software
HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to SSD7000 controller. Installation of the management
software is optional but recommended.
Please refer to HighPoint RAID Management Software documents for more information.
- 8 -