HighPoint SSD7104F Instrukcja szybkiej instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Sprzęt komputerowy HighPoint SSD7104F. HighPoint SSD7104F 9 stron. 4x m.2 port to pcie 3.0x16 nvme raid controller

Drukuj stronę

SSD7104F Hardware Installation

Step 1. On the rear of the SSD7104F, remove the six screws that secure

the unit's heat sink to the PCB.

After removing the screws, carefully remove the heat sink from the

SSD7104F.

Step 2. After removing the casing, carefully turn it over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, however, it can also prevent

the thermal pad form conducting the heat away from the NVMe

SSD's if we don't remove it.