AFJ Instruments LT32C/10 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt sieciowy AFJ Instruments LT32C/10. AFJ Instruments LT32C/10 18 stron. Artificial mains network (lisn)
Drukuj stronęSECTION A: GENERAL INFORMATION
A.1 • SAFETY
This device was built and tested according to CISPR 16-1-2. LISN has been supplied from the factory in
a technical faultless state.
LISN's from AFJ Instruments may use only on power supplies secured by fuses with prescribed safety
devices.
With no safety condition as:
- Device with visible damages,
- Device with loosed parts,
- Device not working,
- Device after storage under bad conditions (in humid or dirty rooms),
it is not allowed switch on any devices.
A.2 • WORKING CONDITIONS
The allowed temperature range during use of the device is +0°C to +45°C. In cases of storage or
transport this range may exceed by -20°C to +70°C.
It is possible that condense water originates inside the device due to storage or transport conditions.
In this case realize a period of 2 hours for acclimatize without use.
The LISN is to use in dry and clean rooms. Avoid conditions like dust, air-humidity, danger of explosion
and aggressive chemical environment. During use a sufficient air circulation is to realize.
- Do not cover the ventilation holes.
- Internal cooling fans automatically switch on in case of LT32C/10 overheating ONLY.
AFJ LT32C/10 LISN - Operating Manual - rev.3.8 / 2019-01
Distributed by:
Reliant EMC LLC
3311 Lewis Ave, Signal Hill CA 90755,
408-916-5750, www.reliantemc.com
7