HighPoint SSD7000 Series Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kontroler HighPoint SSD7000 Series. HighPoint SSD7000 Series 16 stron. Linux rocky linux
Również dla HighPoint SSD7000 Series: Instrukcja instalacji (12 strony), Instrukcja instalacji (14 strony)
Drukuj stronę
SSD7105&7202&7502&7505&7540&7580A&7580B Boot RAID Windows Installation Guide
b.
Check whether NVMe is connected to the controller.
c.
Replace the motherboard slot, enter the UEFI environment and re-enter the command.
If none of the above methods work, please provide
using our
Online Support
possible.
Yellow warning before and after installation of the driver.
Before and after installing the driver, a yellow exclamation point warning appears in the lower
left corner of the installation interface.
Solution:
a. Please confirm "Boot from Storage Devices" is set to "UEFI driver first";
b. Confirm whether UEFI DVD is selected to enter the system installation interface.
Load driver error
When installing the driver, it prompts that the driver needs to be updated.
Solution: The appearance of the error message indicates that other NVMe Drives are
connected to your applicable motherboard. Try the following:
a.
Remove all NVMe Drive installed on the motherboard and reinstall OS.
Portal, include a description of the problem in as much detail as
13
UEFI
log. You can submit a support ticket