DynaVox T10 Instrukcje instalacji
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Futerał DynaVox T10. DynaVox T10 2 stron. Accessible case
Również dla DynaVox T10: Skrócona instrukcja obsługi (2 strony)
Drukuj stronęDynaVox T10 Accessible Case
Thank you for purchasing the accessible case for the DynaVox T10! The accessible case consists of
three main parts:
a. Colored trim rings (Choose one of the five colors provided, unless you are using a
keyguard.)
b.
Snap cover (black)
c.
Rubber boot with tri-fold cover (black)
K
EYGUARD
The keyguard insert replaces the colored trim ring. If you already have a keyguard installed, you do not
need to remove it – the keyguard and snap cover are the same parts you would use for a and b above.
Installation of the accessible case is straightforward as shown in the following diagram
1. Place the colored trim ring inside the window area of the snap cover. Register the two
openings for the washers at the bottom and the opening for the ON button at the top. The trim
ring will self-register and fill the recess for the keyguard when placed on the tablet.
K
EYGUARD
If you are using a keyguard, place the keyguard insert (the acrylic part with the holes) into the Snap
Cover instead of the colored trim ring.
2. Next, install the snap cover and colored trim ring (or keyguard) onto the DynaVox T10. The
snap cover snaps on, and the trim ring will self-register.
Accessible Case Installation- DynaVox T10
Part # 401439-A
Installation Instructions
U
SERS
U
SERS
Items shown in diagram to the left:
1. DynaVox T10
2. Colored trim ring (or keyguard insert)
3. Snap cover (black)
4. Rubber boot with tri-fold cover (black)
1