Dynex DX-24L200A12 Podręcznik zawierający ważne informacje - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik zawierający ważne informacje dla TELEWIZOR LCD Dynex DX-24L200A12. Dynex DX-24L200A12 12 stron. Téléviseur acl de 24 po, 1080p
Również dla Dynex DX-24L200A12: Podręcznik (6 strony), Podręcznik szybkiej konfiguracji (2 strony), Specyfikacje (1 strony), (Ważne informacje (12 strony), (Skrócona instrukcja instalacji (2 strony), (francuski) Ważne informacje (12 strony), (Francuski) Podręcznik szybkiej instalacji (2 strony)
Drukuj stronę
Maintenance
Problem
Solution
No output from one of the
• Adjust the audio balance. See "Adjusting sound
speakers
• Make sure that the audio cables are connected
After images appear
• Do not display a still image, such as a logo,
Remote control
Problem
Solution
Remote control does not
• Make sure that the power cord is correctly
work.
• Make sure that there are no obstructions
• Point the remote control directly at the remote
• Make sure that the batteries are installed
• Replace dead batteries with new batteries. See
Trouble programming your
• See instructions and a table of common codes in
existing universal remote
control.
• Codes are subject to change. For up to date
• Replace dead batteries with new batteries. See
• Refer to the User Guide that accompanied your
General
Problem
Solution
No power
• Make sure that the power cord is correctly connected
to your TV and a power outlet.
• Unplug the power cord, wait 60 seconds, then plug
the cord back in and turn on your TV.
• Other devices (for example, surround sound receiver,
external speakers, fans, or hair dryers) may be
interfering with your TV. Try turning off one device at
a time to determine which device is causing
interference. Once you have determined which
device is causing interference, move it further from
the TV to eliminate the interference.
"No signal" error
• Press INPUT and make sure that you have selected
message is displayed
the correct input for the device or service you are
trying to use.
• If you are using a cable or satellite box, use the
remote that came with that box to change channels.
• Make sure you have the correct input selected to
view channels from the cable or satellite box.
settings" in the online User Guide.
correctly and securely to the back of your TV.
game, or computer image, for an extended
period of time. This can cause a permanent
after-image to be burned into the screen. This
type of damage is not covered by your warranty.
connected to your TV and a power outlet.
between the remote control and the remote
control sensor on the front of the TV.
control sensor on your TV. For the location of the
remote control sensor, see "Front" in the online
User Guide.
correctly. See "Installing remote control
batteries" in the online User Guide.
"Installing remote control batteries" in the
online User Guide.
"Programming a different universal remote
control" in the online User Guide.
codes, go to
www.dynexproducts.com/remotecodes.
"Installing remote control batteries" in the
online User Guide.
universal remote control and contact the
manufacturer if problems persist.
Problem
Solution
After Auto Channel
• Reception can vary by channel depending on the
Search, there are no
broadcast power level of a given station. Contact
channels
your cable or satellite TV provider.
• Make sure the antenna or cable/satellite TV is
connected securely to your TV.
• Try replacing the cable between the antenna/cable
or cable/satellite box and your TV.
One or more channels
• Make sure that the channels are not blocked. See
do not display.
"Setting parental control levels."
• Make sure that the channels are not hidden. The
channel may have been deleted from the channel
list. You can tune to the channel by pressing the
number buttons or you can add the channel back to
the channel list. See "Hiding channels" in the online
User Guide.
• If you are using a cable or satellite box, use the
remote that came with that box to change channels.
• Make sure you have the correct input selected to
view channels from the cable or satellite box.
• If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see "Checking the digital signal
strength" in the online User Guide.
Password is lost.
• Enter 9999 to access parental controls, then set a
new password. See "Setting or changing the
password" in the online User Guide.
Some settings cannot be
• If a setting is grayed, the setting is not available in
accessed.
the current video input mode.
TV cabinet creaks.
• When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand or
contract which can cause a creaking noise. This is not
a malfunction.
Control buttons do not
• Make sure that the Button Lock option is set to Off.
work
See "Locking control buttons" in the online User
Guide.
• Unplug the power cord, wait a few seconds, then
plug the cord back in and turn on your TV.
TV keeps turning off
• Make sure that the sleep timer is not turned on. See
"Setting the sleep timer" in the online User Guide.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your TV, then
turn it on again.
Maintenance
Cleaning
• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.
5
DX-24L200A12