Gallien-Krueger 400RB series Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Gallien-Krueger 400RB series. Gallien-Krueger 400RB series 16 stron. High-current bass amplifier
Również dla Gallien-Krueger 400RB series: Instrukcja obsługi (4 strony)
Drukuj stronę
.
To insure proper operation and to avoid
potential safety hazards, place the unit on a
firm, level surface. When installing the unit
in a rack, be sure the mounting hardware can
support the amplifier's weight. To save space
in your rack, the 400RB's feet can be
.
removed using a Philips head screwdriver.
Make certain that proper space is provided
for ventilation. The 400RB Series requires at
least ½ inch clearance above for proper
ventilation. Never block the fan vent holes in
the top or front of the amplifier. If the
amplifier will be installed in a rack or other
enclosed area, make sure that there is
sufficient air movement within the enclosure
to allow proper cooling. Consult your dealer
.
for more information.
Avoid installation in extremely hot or cold
locations, and areas that are exposed to direct
. .
sunlight, or near heating equipment.
Avoid moist or humid locations.
Remember, power amplifiers generate heat.
The heat sink fins and ventilation slots that
form part of the enclosure are specially
designed to remove this heat. Placing other
electronic equipment near these heat-
dissipation systems may possibly affect the
long-term reliability of both your amplifier
and the other equipment.
Before moving the unit, be certain to disconnect any
interconnection cords with other components, and
make sure that you disconnect the unit from the AC
outlet.
When the unit gets dirty, wipe it with a clean, soft and
dry cloth. If necessary, first wipe the surface with a
soft cloth slightly dampened with mild, soapy water,
followed by a fresh cloth with clean water. Wipe
immediately with a dry cloth. Never use benzene,
thinner, alcohol, or other volatile cleaning agents.
Do not use abrasive cleaners, as they may damage the
finish of metal parts. Avoid spraying insecticides near
the unit.
Your new amplifier is rugged. It was built to give you a
lifetime of trouble-free operation, if it is operated in
accordance with the instructions contained in this
manual. The only maintenance required is cleaning. If
you are going to move your amplifier around frequently,
we recommend a road case to protect it from scratches
and road wear.