HighSecLabs FI11PH-M Podręcznik szybkiej konfiguracji - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Sprzęt sieciowy HighSecLabs FI11PH-M. HighSecLabs FI11PH-M 8 stron. Secure kvm isolators

Drukuj stronę
SECTIONS
Table of Contents

SAfETy AnD REgULATORy STATEMEnTS

Supported Hardware
This one or more of the following symbols may be included in your product
documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the product
user manual.
Dangerous Voltage: This symbol is intended to alert the user to the presence
of uninsulated dangerous voltage within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off switch is in the On
position.
Power Off: This symbol indicates the principal on/off switch is in the Off
position.
Protective Grounding Terminal: This symbol indicates a terminal which must
be connected to earth ground prior to making any other connections to the
equipment.
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible damage to equipment,
please observe the following precautions.
• Instructions: Do not disable the power grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord into a grounded (earthed) outlet that is easily accessible at
all times.
• Disconnect the power from the product by unplugging the power cord from
either the electrical outlet or the product. The AC inlet is the main disconnect for
removing power to this product. for products that have more than one AC inlet, to
remove power completely, all AC line cords must be disconnected.
• This product has no serviceable parts inside the product enclosure. Do not open
or remove product cover.
CAUTION: Some HSL products contain a lithium battery. This battery is not a field replaceable
item, and replacement should not be attempted by a user. If errors occur when using the
product and the battery is suspected, contact HSL Technical Support.
HSL Secure KVM Isolators Quick Setup Guide
1
2
WARNING: for Service Personnel Only - There is a risk of explosion if the battery is replaced
with an incorrect type. Dispose of used batteries according to the manufacturer's instructions.
This product is for use with other products that are Listed or Certified by a nationally
Recognized Testing Laboratory (nRTL).
NIAP Protection Profile
This product is compliant with the nIAP Protection Profile PSD version 4.0 certification
for peripheral sharing switch devices.
Installation Precautions
NOTE: In order to comply with the product's Common Criteria evaluation and to prevent
unauthorized administrative access to the product, the default administrator username and
password must be changed prior to first product use.
Do not connect this product to computing devices that:
• are TEMPEST computers
• include telecommunication equipment
• include frame grabber video cards
• include special audio processing cards
WARNING: Peripherals' Warning - for security reasons, this product does not support wireless
keyboards. It is recommended not to connect a microphone or headset to the audio output port.
Security Vulnerability
If you are aware of a potential security vulnerability while installing this product,
contact Technical Support immediately by:
• Web form: www.highseclabs.com/support/case/
• Tel: +972-4-9591191/2
WARNING: Unit Enclosure Warning - If the unit's enclosure appears disrupted or if all LEDs
flash continuously, remove the product from service immediately and contact Technical
Support.
Change Management
for change management tracking, perform a quarterly log check to verify that the RfD
was not improperly used to override the current device policy by an unauthorized person.
3
6