Agrowtek VXi Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Agrowtek VXi. Agrowtek VXi 15 stron. Digital irrigation valve controller

Power Connections

Input Power: 15 Vdc, 1A is required to operate the unit which may be supplied via:

a) the 2.1/5.5mm DC barrel jack and standard power supply, or

b) the V-in terminal block on the circuit board (for industrial/DIN rail power supplies.)

Standard 7/8" diameter knock-outs are provided on either side for 1/2" EMT conduit ttings.

1/ 2" EM T

K nock- outs

12- 24 V DC P ower J ack

Input power protection fuse of 1A required to prevent damage to the unit from overloading.

Recommended wire routing for low noise and electrical interference is shown in the diagram below.

Route sensor and input wires on the left side of the unit and route output wires on the right side of the unit,

keeping the sensor wiring and output wiring separated.

1. Input Wiring

2. Output Wiring

Maximum 1A power supply current!

GND

GrowNET P ort

RS 4 8 5 / M O DB U S RT U